Yay I Installed Peel and Stick Temporary Wallpaper In My Bathroom!

I finally did something I’ve been wanting to do for years, but didn’t feel like it was worth it in my last apartment. I installed bathroom wallpaper!

As you probably know I’m a renter, so many of my projects have to be temporary. That’s why I decided to look into peel and stick wallpaper options. There’s such a great selection out there, but when I found this botanical print from Tempaper I was smitten!

Turns out installing this type of wallpaper isn’t as daunting as it seems. The paper is super durable and forgiving, allowing you to adjust and re-position as needed to get everything lined up and perfect. This is great news because bathrooms can be especially tricky. Working your way around a toilet can be a big pain in the ass. No pun intended (zing!).

The first thing you need to do is measure your wall. By the way, Tempaper has a cool calculator that helps you determine how much paper you need. I only needed one roll for this wall and had some to spare. Please note that this kind of paper won’t adhere well to textured or matte walls. Eggshell, Semi-gloss, or gloss paint works best. Bathrooms usually have semi gloss paint, so you should be good. 

How to install peel and stick Tempaper wall paper in a bathroom.jpgNext, pre-cut the lengths you need. This makes your life so much easier. Be sure to line up the pattern with each new piece you cut.How to install peel and stick Tempaper wall paper in a bathroom (2)

Remove any toilet paper holders or towel racks that might get in the way. Outlets are fine, you can just use a razor to cut around them later.

I did this entire job alone because there’s just not enough room in my tiny bathroom for this to be a two person job. If you have room for help, it’ll make the job easier, but if its just you don’t worry, you can do it. As you can see I could barely fit the step ladder.How to install peel and stick Tempaper wall paper in a bathroom (3)

Now the real fun starts. The first piece is the trickiest because you need to get it on there straight, that way all the following pieces line up. Use the wall corner and ceiling (and a level if you have one) as your guide and you’ll be fine. How to install peel and stick Tempaper wall paper in a bathroom (4)

As you can see I didn’t measure or pre-cut the window section. Just simply go around when you’re done and trim around any windows, outlets, and edges with a razor blade. Just keep lining up each piece at the side seams and use a Tempaper squeegee to push out any air bubbles and smooth it out.

How to install peel and stick Tempaper wall paper in a bathroom (5)And that’s it! If you’re wondering how well this paper might hold up in a bathroom, I’ll just say I took a steamy shower about an hour after I was done and no seams or edges came away from the wall. The paper is also non-porous, so it seems it’ll hold up to moisture well.

How to install peel and stick Tempaper wall paper in a bathroom (6)

I really love how much life it brings into this small room. I originally wanted to try to do the whole room, but I think the accent wall approach is actually perfect for in here.How to install peel and stick Tempaper wall paper in a bathroom (7)

I love pink and green together so I added pink and coral colored towels and rugs and a flamingo shower curtain.

How to install peel and stick Tempaper wall paper in a bathroom (8)

Major mid-century Palm Springs vibes, right? Now I just need to find some art work and make a valance for that window (stay tuned for that) and it’ll be complete!

 

Special thanks to Tempaper for being kind enough to provide product for this project. As always, all opinions are genuine and my own.

Advertisements

Mid-Century Inspired Refrigerator Makeover with Peel & Stick Wallpaper

The only thing that really bothered me about my new kitchen was the way the refrigerator looked in the space.

Use peel and stick wallpaper to cover a refrigerator (before) (2)

Now don’t get me wrong it’s a nice brand new refrigerator, but the way the side of it created a big black rectangle in in the middle of everything bothered me.

I bought a peel and stick wallpaper a couple of years ago with the intention of covering my old refrigerator, but never got around to it. Luckily I found the paper when I was unpacking and since I’m still renting I decided to put it to use!Use peel and stick wallpaper to cover a refrigerator

I like the shape of the refrigerator door and I don’t mind the stainless, so I decided to only apply the wall paper to the sides and top to cover all the black. I was also inspired by the two-toned refrigerators that were popular back in the day.

The paper I used is a light minty blue with a metallic silver cross-hatch pattern. It looks very vintage to me and reminds me of mid-century upholstery fabric. I knew it would work perfectly for what I wanted to attempt.

All I had to do was pull out the refrigerator and apply the peel and stick the paper, carefully matching the seams and making sure to smooth out any air bubbles. This type of paper is very easy to work with and made the job extremely simple.Use peel and stick wallpaper to cover a refrigerator (before) (3)Use peel and stick wallpaper to cover a refrigerator (1)

To finish off the edges I used a thin washi tape in the same color and similar pattern. This gave it a more finished look and helped make sure all of my edges were properly secured.Use peel and stick wallpaper to cover a refrigerator 1.jpg

Use peel and stick wallpaper to cover a refrigerator 3.jpgWhat an improvement! The refrigerator no longer stands out like a sore thumb and adds a nice subtle color and more retro flair to the space. It also gives it a nice smooth texture which makes it way easier to clean than the bumpy texture that it had before. I love it!Use peel and stick wallpaper to cover a refrigerator 2.jpg

Now I’m going to use a different peel and stick wallpaper to cover that back wall as well. Stay tuned!

 

DIY Fabric Wall Treatment//How To Use Fabric As Temporary Wallpaper

Do you like the look of wallpaper but can’t commit to installing any? Same here. A lot of the projects I do in my apartment have to be temporary because I rent, so I’m always trying to find inexpensive and temporary solutions to my design problems.

When I redecorated my living room earlier this year I knew I wanted to do an accent wall behind my sofa, and I knew I wanted it to be a pattern. I’d heard of people using fabric as temporary wallpaper before and decided I wanted to give it a whirl. I fell in love with a fabric that I ended up scoring for $6, and the other materials are really inexpensive, so it was no big loss if it didn’t work out.

For this project you need fabric (I used a light weight cotton), liquid starch, push tacks, an exacto knife, and a paint roller. For everything I paid less than $20 total!

Side note: I did this project on the rainiest day of the year, so please excuse the lighting in some of the images!

DIY Fabric Wall Treatment (2).jpgDIY Fabric Wall Treatment.jpg

First, I used push tacks to hang the fabric up on the wall. I tacked at the ceiling line and sides.

DIY Fabric Wall Treatment (3).jpg

Then I used a paint roller to apply the liquid starch to the fabric.

DIY Fabric Wall Treatment (4).jpg

DIY Fabric Wall Treatment (5).jpg

I started at the top, smoothing out air bubbles and wrinkles as I worked my way down. Make sure you saturate the fabric thoroughly so it sticks to the wall very well. I repeated the process for each piece, matching up the edges on the sides. This fabric had a label on one of the selvage edges, so I cut that off before applying it to the wall.

DIY Fabric Wall Treatment (6).jpg

Let it dry thoroughly for several hours. I let mine dry over night.

DIY Fabric Wall Treatment (7).jpg

Next, I used an exacto-knife to cut around the edges of the wall and around any details like air vents and electrical sockets. For any left over air bubbles, I just sliced them and re-saturated, then pushed any air out. DIY Fabric Wall Treatment (9).jpg

DIY Fabric Wall Treatment (8).jpg

That it! I was actually shocked at how much easier it was to do than I imagined. It took me a few hours but wasn’t as labor intensive as I anticipated. Here’s how it turned out!

DIY Fabric Wall Treatment (12).jpgDIY Fabric Wall Treatment (11).jpg

IMG_5327-1.jpgDIY Fabric Wall Treatment (14).jpg

I love it! 

To remove it all you have to do is set a corner with warm water and peel it straight off the one in one piece. I actually removed a piece and put it back up on the wall because I didn’t like the placement. The best part is this fabric can be laundered and reused whenever I choose to remove it! 

Clean up is also a breeze. Just regular soap and water will do! 

Have fun! 

A Green and Gold French Provincial Side Table Makeover with Chalk Paint®

Back in 2011 I posted one of my first furniture makeovers here on the blog. It was this French Provincial style side table that I found near a dumpster. I took it home, scrubbed it down, and gave it a fresh coat of white paint.

Upcycle entry way projects

Over the years it has found its way around my apartment and eventually retired and went back into storage. You guys know I love to switch things up with the seasons so I thought it was time to bring it back in, but since it needed a new paint job I decided to give it a different look!

Table Makeover with Chalk Paint® by Annie Sloan.jpgNormally I go with fresh whites, or bright colors, but when I saw the new Amsterdam Green from Chalk Paint® by Annie Sloan I was in love and decided to try a different direction. The green is a deep, warm, vintage green that looks amazing against the gold accents I wanted.

Table Makeover with Chalk Paint® by Annie Sloan (2).jpg

One of the reasons I really love Chalk Paint and recommend it to those who are painting furniture for the first time is that it’s very forgiving and easy to use. It applies nicely and dries very level and fast.

Table Makeover with Chalk Paint® by Annie Sloan (3).jpgFor this project all I had to do was apply two coats of  Amsterdam Green Chalk Paint® with a Pure Bristle Brush, no priming necessary. I like this brush. It holds a lot of paint and covers a lot of surface.

Table Makeover with Chalk Paint® by Annie Sloan (4).jpgThen, once the paint was completely dry, I applied Clear Chalk Paint® Wax with a Wax Brush and buffed it out with a soft cloth. This helps protect the paint and give it a more finished look.

Once that was done I added some gold details and a new crystal drawer knob.

Table Makeover with Chalk Paint® by Annie Sloan (5).jpgTable Makeover with Chalk Paint® by Annie Sloan (6).jpg

Voila! All done! Such a dramatic change and it took almost no time and effort.Table Makeover with Chalk Paint® by Annie Sloan (7).jpg I’m loving the vintage feel and warmth it’s adding to this corner.

Table Makeover with Chalk Paint® by Annie Sloan (8).jpg

I’m really happy with the way it turned out and think it adds a really nice vibe for the season. Now what else can I paint…?

Feeling inspired? To purchase these products, find your local Annie Sloan Stockists here!

 

This post was sponsored by Unfolded, but all opinions and ideas are my own.

 

IKEA HACK: KARLSTAD Pink Mid-Century Inspired Sofa Makeover

Ohhhh man, you guys. I’m reallllly excited about this project. Bear with me because there’s a lot to cover (no pun intended).

A while back I posted about how I was on the hunt for a new sofa and narrowed down a few of my favorite contenders. One of the contenders was the KARLSTAD from IKEA because I knew I could save a lot of money by attempting a hack, and thanks to a pretty hefty tax audit (kill me) that’s what I ended up having to do. As luck would have it I found a perfect KARLSTAD at IKEA for $250 in the clearance section. A lot of you already know that I’m no stranger to IKEA Hacking, but it has been a while since I did one so I was feeling up to the challenge. Luckily it didn’t take long before I knew exactly what I wanted to do in order to make it come close to the couch of my dreams.

 

KARLSTAD IKEA HACK

The KARLSTAD is pretty much an IKEA staple and I’m sure you’ve seen it in many homes. It has clean, modern lines and comes with an easily removable slip cover. Perfect for my hacking plan. The one I bought had a grey cover and my IKEA was sold out of the white slip cover, but luckily my best friend in Florida found one at her store and was able to send it to me. Since KARLSTADs have completely removable slip covers I knew I could dye it to be whatever color I wanted.

Rit Petal Pink

I picked up a few boxes of Rit dye in Petal Pink. I filled my bathtub with boiling water and dye and soaked the slip cover until it was saturated.Dye Sofa Slip Covers in Bath Tub Then I promptly had a minor freak out because it didn’t turn out the rosey/peachy/blush pink color that I wanted and that appeared on the box. Dye Karlstad Sofa Slip Cover

I took a deep breath, refusing to be defeated, and rushed to the fabric store to grab some Rit Color Remover, a magical powder that  gently removes all of your regrets and gives you a clean start. If only I could bathe myself in it. Just kidding…!

510qf1gmr3l

How to remove Rit dye

After a quick soak the slip cover was back to white. I knew at this point I was going to have to custom mix my own shade of pink so I threw the covers in the wash and went back to the fabric store for the 5th time to pick up more dye.

I can’t tell you the exact ratios of these colors that I used for my shade because I was constantly adjusting and testing the color. I want to say it was something like 4 parts pink, 1/2 part yellow, 1/8 part tan, but I’m not 100% sure so don’t come back yelling at me if yours turns out gross. I also diluted it a lot more than the first time so the color would be more pastel.

My husband and I worked nervously and quickly, scalding our hands and sweating over the boiling dye bath in our typical Melo-dramatic style, but it was worth it. It worked out perfectly!img_4426-3

 

Dying the slip cover was only the first step. I wanted new legs and pretty tufting, and dammit that’s what I would get. These steps were actually much easier and less annoying than the dye part.

I changed the legs on my last KARLSTAD Love Seat in the past, so I knew that wouldn’t be a big deal. I used mid-century style furniture legs that I got from Lowe’s for like $2 and spray painted them gold and white.

DIY Furniture legs for $2

Then I installed a top plate and attached the legs to the corners of the sofa.

Change the legs on your sofa for under $20I wanted to have legs in the center of the sofa, too. Partly for more support, but mostly because I like the look of it.

For this I just drilled a hole and inserted the leg directly into the wood.

Change the legs on your sofa for under $20

That would have looked great on it’s own but I wanted tufting. I had spare fabric from an extra piece of slip cover that I found in the clearance bin at IKEA. I used this for my color test strips and then dyed a piece with the plan of covering buttons for tufting.

I used 7/8″  button cover kit and thread to make my tufting buttons, much like I did in this past IKEA hack.DIY Upholstery Button Covers

Then I attached the buttons to upholstery string and used a long upholstery needle to feed the string through the cushion. I pulled the string tight and used these decorative buttons to anchor the string on the back of cushion. I didn’t want to go through the back of the cushion cover, and a knot would have just pulled back through the cushion insert, so I used the decorative buttons to hold my tufting in place. Am I making any sense at this point? Hopefully these visuals help.DIY Couch Cushion TuftingDIY Couch Cushion Tufting

And voila!

KARLSTAD SOFA IKEA HACK: Mid-Century Inspired Pink Sofa

The decorative pillows are also from IKEA.KARLSTAD SOFA IKEA HACK: Mid-Century Inspired Pink SofaI love the way the warm pink looks with the white and gold legs.KARLSTAD SOFA IKEA HACK: Mid-Century Inspired Pink SofaI’m so excited to finally have a dreamy pink couch! And for less than $300!KARLSTAD SOFA IKEA HACK: Mid-Century Inspired Pink Sofa

 

DIY White VCT Tile Bedroom Flooring

Up until about a month ago I had carpet in my bedroom and I HATED IT. Between allergies, constant city dust, and senior dogs, having carpet just wasn’t right for our lifestyle. I rent and didn’t think changing the floors would ever be an option, but when it was time to renew our lease and our manager offered to replace or clean our carpet, I seized the opportunity to ask if we could replace the floors at our own expense instead. They surprisingly agreed to my request and gave me the freedom to pick the flooring option of my choice.

I knew whatever option I chose wouldn’t match the rest of the apartment anyway, so I decided to give in to my desire for white floors. I did some research and the easiest and most cost effective of our options seemed to be VCT (vinyl composite tile).  Plus, I’m always down for a mid-century vibe and you can’t get anymore mid-century than vinyl tiles.


I ordered a bunch of samples and ended up choosing Armstrong’s Carnival White , an off-white color with multicolored specks priced at $0.91 per square foot. It’s really cute and has the vintage speckled look I was going for, but was the most cost effective for me as well. Since I rent I didn’t want to invest too much, if you get what I mean. 

This was my first time installing VCT tiles so I’m no expert, but I can tell you that there are some very good and thorough tutorials on YouTube that can explain the techniques you need better than I can through pictures. If you’re planning on doing this project I highly recommend watching several of them.

Luckily my room is pretty much a square so there wasn’t many complicated cuts and I was able to finish the room within a day, by myself, spending less than $300 total.

Tips for Installing VCT flooring (Vinyl Composite Tiles)Here’s a terrible picture of what I started with. As you can see the dark beige carpet and old pink paint absorbed most of the light in the room. The first thing I had to do was remove the old carpet. That was a lot easier than expected and I was able to do it all in one piece. After that I pried up the tack strips and used pliers to remove any stray staples in the floor.

 

Tips for Installing VCT flooring (Vinyl Composite Tiles)

Tips for Installing VCT flooring (Vinyl Composite Tiles)

Then we took the opportunity to paint the walls a nice high reflective white .

After the walls were done I got started on the floor. I used a chalk reel to mark the center points of the room where I would begin laying tiles.

Tips for Installing VCT flooring (Vinyl Composite Tiles)

Next I dry laid some tiles to make sure they would be even and to decide on which way I wanted the speckled pattern to run. A lot of of the time the tile is installed with an alternating pattern but I decided to run mine all in one direction for a seamless look.

Tips for Installing VCT flooring (Vinyl Composite Tiles)

Then I had to use a small notch tile trowel to apply adhesive to the floor. I want to note that this took longer than expected to dry, and didn’t dry clear like the container said it would. I let it dry for SEVERAL hours until it was tacky and a dark amber color. If you start laying the tiles too soon they’ll slide around and make you regret everything. Also, wearing knee pads will save your life.Tips for Installing VCT flooring (Vinyl Composite Tiles)

At this point my dog decided to get around my barricade and lay directly in the glue, promptly getting stuck and full of the stickiest glue that no dog shampoo on earth could remove. After throwing him in a bath to soak and cutting his hair, I was able to continue onto actually laying the tile.

I didn’t get pics of that process because I had to move fast, but I started from the middle line and worked my way out. Once I got to the edges I used a utility knife to cut the edge tiles to size. YouTube will explain all that to you in better visual detail.

Tips for Installing VCT flooring (Vinyl Composite Tiles)

As you can see there were some small gaps between the tile and the wall. You can put a piece of trim around there to finish it off or you can use caulking to fill it in like I did.

Tips for Installing VCT flooring (Vinyl Composite Tiles)Tips for Installing VCT flooring (Vinyl Composite Tiles)

For the threshold I simply used a piece of flat molding and wedged it in the door frame. Simple and sleek. Tips for Installing VCT flooring (Vinyl Composite Tiles)I let the tile set for about a day and then mopped it and applied four coats of floor polish with a microfiber mop. Tips for Installing VCT flooring (Vinyl Composite Tiles)

Tips for Installing VCT flooring (Vinyl Composite Tiles)

What a difference! My room feels so much cooler, fresher, and brighter! I only wish I had done this sooner. Here’s how it looks furnished. Much better than before!

Vintage California Style Bedroom Decor

DIY Yellow Fringe Blackout Curtains

You guys, let me start by saying I’m bummed because I lost all of the how-to pics from this project when my old computer died, BUT I still wanted to share how easy it is to make your own curtains.

I couldn’t find any light blocking curtains that I liked for my bedroom so I took on the task of making my own. Curtains are the easiest thing to make if you can sew a straight line. All you need is enough fabric to make a panel long enough to fit your window and hem all four sides, leaving a big enough loop at the top to fit a curtain rod through. I found a really nice and inexpensive fabric in the perfect shade of buttercup yellow, but the problem was that it was too thin and let a lot of light through. We’re not morning people so this was a no-no. To remedy the problem all I did was lined my fabric with an old black out curtain from IKEA. Easy enough!

 

IMG_4254.jpgDoing that completely blocked any light from coming into my bedroom and also added some much needed weight and heft to the panel.

IMG_4264.jpgFor some extra flair I added a strip of vintage looking rope fringe to the top.IMG_4270.jpg

 

 

IMG_4252.jpgTada! Stay tuned for more bedroom decor updates and be sure to follow along on Instagram.